OK, I can generate the MFC error but not using my normal log in as an
administrator in Windows 7/64. If I create a second account with
standard user permissions, I see the MFC error and can't run RTTYrite
at all.
I suspect the problem is one of permissions but at this point I'm
not able to find a work around ... manually giving "everyone" full
permissions on the file mmttytnc.dll in C;\ProgramData\WriteLog does
not solve the problem and neither does copying mmttytnc.dll back to
the Writelog program directory.
This is probably going to take someone with some specialized debugging
software to figure out why "non administrator" users get the MFC error
in RTTYrite with MMTTY.
73,
... Joe, W4TV
On 7/11/2010 3:41 PM, Jim McDonald wrote:
> Hi Joe,
>
> I did all of that but still no joy. I cleaned the registry too. Two
> instances - one for each receiver - both work standalone. Same UserPara.ini
> error and the error that MMTTY is initializing. I can get into the MMTTY
> setup screens within WL but MMTTY never starts.
>
> The full install of 10.77H was done today.
>
> Could Norton Internet Security be the problem? I disabled both the firewall
> and AV but no change.
>
>
> [Rttyrite]
> Port=1
> Speed=0
> Type=15
> MMTTY_LOCATION=C:\Ham\MMTTY\
> Y=181
> W=960
> H=726
> HIGH_TONES=0
> X=1565
> MMTTY_USE_MENUS=1
> MMTTY_USE_BUTTONS=0
> MMTTY_ALWAYS_ON_TOP=0
> MMTTY_USE_PROFILE=1
> MMTTY_CQAFC=1
> MMTTY_CQNET=0
> MMTTY_SPAFC=0
> MMTTY_SPNET=0
> MMTTY_AUTOAFC=1
> Font=APPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAJBAAAAAAAAAAAAADACABABCBEOGEGBGMGFGACN
> EPGOGPGAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
>
> Jim N7US
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Joe Subich, W4TV
> Sent: July 11, 2010 13:31
> To: Jim McDonald; writelog>> "[WriteLog]"
> Subject: Re: [WriteLog] Error Message when Writelog 10.77H is started up
>
>
> Try uninstalling the MMTTY Plug-in from Control Panel, then
> reboot the computer (cold boot) and reinstall the plug-in.
>
> I've just done a complete clean install of WriteLog 10.77H
> in Windows 7/64 (professional) and can't get an error.
> MMTTY 1.66g is installed in two separate directories
> D:\Ham Programs\MMTTY and D:\Ham Programs\MMTTY2 and both
> copies have been configured/run stand alone from those
> directories.
>
> 73,
>
> ... Joe, W4TV
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|