My problem exists with a Quad core Pentium, WinXP SP3, 4 GB of memory, no
external keyer. The computer is interfaced to my FT-2000 via a USB-Serial
Port cable/K1NU Serial & CW cable.
I have been having this problem since release 10.73
The jittery CW happens randomly. I hit the escape key and replay the message
without further problems until the next time.
I have no indications of RFI getting into the computer.
N6WIN.
On Tue, Nov 9, 2010 at 5:18 PM, Joe Subich, W4TV <lists@subich.com> wrote:
>
> I did not say a processing issue as in not enough CPU or
> memory. What I suggested is that something was "strange"
> on the way processes were switched between/among the CPU
> cores or even suspended/swapped out.
>
> Since there are reports of other tasks that seem to be
> scrambled from time to time (e.g., W5XD keyer interface),
> I would suspect a subtle system timing/threading issue.
> Such issues are relatively easy to trigger and sometimes
> difficult to solve when performing real time tasks.
>
> 73,
>
> ... Joe, W4TV
>
> On 11/9/2010 8:07 PM, Ken Widelitz wrote:
> > I'm using a 2.83 ghz Quad Core with 3 gb of memory. I don't think it is a
> > processing issue here.
> >
> > 73, Ken, K6LA / VY2TT
> >
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> >
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|