In Writelog 10.90A when I select Web Update Data Files, I get the window,
de-select those I don't want to update, click OK and a dialog box appears
"Writelog must save and restart to install the new files. OK?". If I choose
OK, WL shuts down and restarts in a few seconds. It can't have downloaded
anything.
I have WL is installed in /program files/ham radio/writelog
Anyone?
Thanks
Tony
K2NV
On Oct 18, 2011, at 8:10 PM, Joe Subich, W4TV wrote:
>
> Eric,
>
> There is an option "More" in the Ports menu that shows COM9-COM16.
> Unfortunately, I just checked and at least in WL 10.88 and 10.90,
> if a port other than COM1-COM8 is selected, that port selection is
> not passed to MMTTY. I don't know if the fault is in RTTYrite or
> the MMTTY plug-in since the plug-in was written before AA6YQ added
> COM9-COM16 support to MMTTY in MMTTY version 1.67.
>
> If one has a UART based serial port the work-around is to select
> "Hardware FSK" along with COM9-16 and allow RTTYrite to handle
> transmission ("Hardware FSK" is not recommended with microHAM
> Router due to the USB buffering issues).
>
> Long term, the issue of MMTTY plug-in/RTTYrite port passing should
> be addressed.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 10/18/2011 6:38 PM, Eric - VE3GSI wrote:
>> Tony,
>>
>> Unless things have changed, my notes show with MTTY, Writelog only supports
>> to COM8. I will admit my notes have NOT been updated for quite sometime and
>> the programmers may have made changes. Unfortunately I can not verify my
>> notes at the moment.
>>
>> Eric - VE3GSI
>>
>> ----- Original Message -----
>> Sent: Tuesday, October 18, 2011 5:33 PM
>> Subject: [WriteLog] MMTTY Challenges
>>
>>
>>> I have been trying to get Writelog running with MMTTY and FSK.
>>> In stand alone mode, MMTTY works fine. It also works fine with N1MM.
>>> I am using a real COM port (COM10) using 2N2222A keying for PTT and FSK.
>>> (Winkey for CW)
>>> I am confused about the PORT selection. When I select PORT 10 (and also
>>> in MMTTY) MMTTY switches back to SOUND and FSK does not work.
>>> I have spent untold hours trying to figure things out. And have read
>>> everything on Don's very useful web site (AA5AU).
>>>
>>> I am using WInXP Home, Creative Labs sound card.
>>>
>>> Anyone??
>>> Tony
>>> K2NV
>>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|