WriteLog
[Top] [All Lists]

Re: [WriteLog] Hardware Generated FSK

To: writelog@contesting.com
Subject: Re: [WriteLog] Hardware Generated FSK
From: Steve AI9T <steve@ai9t.com>
Reply-to: steve@ai9t.com
Date: Mon, 01 Apr 2013 14:52:06 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
On 4/1/2013 2:31 PM, Ed Muns wrote:
Steve AI9T wrote:
I'm using the Microham MKII. Is there anyway to turn off the
Hardware Generated FSK in this version of Writelog? I would
rather be able to choose my port.
If you use MMTTY as your main decoder and therefore your encoder for
transmit, then simply select 'None' on the Rttyrite Port menu and then go to
the MMTTY Options TX tab to set your FSK/PTT COM port.
I have done this and it is still slow. Also the Hardware Generated FSK 
is checked and greyed out.
This just transmits way to
slow. I have tried ever configuration I can think of and I
can't get it to work correctly. You can see it's not right in
the RTTYRITE window just the way the text goes across the
screen when you send.
Joe will have to address this.  The problem is between Rttyrite Hardware
generated FSK and microHAM Router.  There is no speed issue with direct COM
port FSK/PTT keying.
Yes,, I agree it seems to be related between WL and MKII My S & P rig 
setup uses a couple transisters for keying with no problems.
   I reinstalled my regular MMTTY Plugin back into WL.
This was not necessary because either MMTTY FSK or Rttyrite FSK can be
selected by virtue of the choice made on the Rttyrite Port menu.  (Either
'None' or a COM port number.)  However, MMTTY Plug-in and the XMMT.ocx
interface can happily coexist.  The risk is confusion over which items on
which menus to tick in order to get what you want.

I remove all the rttyrite sections from WL ini then I can bring
up WL set the TU Type to the old MMTTY plugin. Then close WL
and reopen,, then open a RTTYRITE window. If I try to go to
TU Type again there is nothing but a blank pull down menu.
The RTTYRITE freezes and I have to shut it down from the taskbar.
Try deleting all Rttyrite sections in writelog.ini again.  You may not have
deleted all of them or maybe not in the active writelog.ini file.  be sure
to exit WriteLog, then delete the Rttyrite ini sections, then restart
I have removed all the sections from the INI file many times. If I try 
to pick the standard MMTTY plugin I get the same problem.
WriteLog.

Ed W0YK


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

--
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>