One of the design criteria for the Ten-Meter RTTY Contest was that contest
loggers would not have to create another contest module. Note that the
rules for this contest are identical to the ARRL RTTY Round-Up except it is
10 meters only, low power and Packet is permitted in all entry classes.
In other words, select the ARRL RTTY Round-Up in whatever logger you use and
have fun.
The rules for the Ten-Meter RTTY Contest state ...
6.3. All logs must be submitted in Cabrillo file format. The CONTEST tag in
the Cabrillo header for this contest is TEN-RTTY. However, submitted
Cabrillo file logs may use ARRL-RTTY as the contest tag and the log
submittal robot will change it to TEN-RTTY. This means you should select
ARRL RTTY Roundup in your contest program. Optionally, you may use a text
editor to change the CONTEST: TEN-RTTY line or let the robot do it. The
correct, and only, power category is LOW (CATEGORY-POWER: LOW). HIGH power
entries will be classified as CHECKLOGs. The Cabrillo file must meet the
Cabrillo 2 or Cabrillo 3 ARRL RTTY Roundup template specification.
Ed W0YK
*****************************************************
Dick W0RAA wrote:
Did I miss something? I haven't seen any info on what WL module is being
used for the upcoming 10 meter RTTY Contest this weekend.
Can anybody help?
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|