It's typical for this to happen when using a COM port for PTT but I am unsure
why it would happen with USB and a MK - maybe the same reason. During the boot
process, RTS toggles states and this causes the radio to key. I normally turn
my radio off when when booting the computer.
73, Don AA5AU
________________________________
From: Darrel<k1ku@myfairpoint.net>
To: writelog@contesting.com
Sent: Wednesday, March 5, 2014 3:36 PM
Subject: [WriteLog] Rig keys up when WL Boots
Hi and thanks...
Just upgraded to Ver 11.18 and it each time it boots the FT-2000 is keyed.
I've used WL and an older Microkeyer for years and had no problem like this
before.
I've spent a couple of days checking the web and double checking the MK and
WL setup rules, connections to the soundcard, etc.
Thanks to anyone who can point me in the right direction for a fix.
73,
Darrel - K1KU
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/