I had the same thing happen when I just upgraded to the latest release.
As I recall, I reselected Radio | Number of Radios | 2 and things
started working again and have been fine.
Mike
---
73,
Mike, N1JEZ
"A closed mouth gathers no feet"
On 2015-07-23 15:29, Rob K6RB wrote:
Yesterday my WriteLog app stopped supporting SO2R. It no longer
switches between radio 1 and 2 when I press the up or down arrow keys,
as it used to do. Before I started ripping into connection issues, I
lit up N1MM+ and it works just fine. So, I know I have no problem with
the K3s, DX Doubler, the COM adapters and the connections.
I have not changed any of the port assignments, or any other
parameters. I do see the emphasis switch from radio 1 to 2 when I
press the arrow keys, but the sound of the relay is not present, and
the TX LED on the DX Doubler does not switch – nor does the keyed
radio.
Any suggestions?
Rob K6RB
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|