Yaesu
[Top] [All Lists]

[Yaesu] FT100 advice

To: <yaesu@contesting.com>
Subject: [Yaesu] FT100 advice
From: jmerril1@twcny.rr.com (John L Merrill)
Date: Sat, 9 Sep 2000 17:37:13 -0400
Mike:
I read those too and I'm a little concerned. I think I might do as you are
and wait to see how the D is.

73,John
----- Original Message -----
From: "Mike" <micharl@bellsouth.net>
To: <yaesu@contesting.com>
Sent: Saturday, September 09, 2000 5:28 PM
Subject: RE: [Yaesu] FT100 advice


>
> John,
>
> The eham.net product review section has a lot of user input on the FT-100.
> I want one, too, but I'm going to wait and see how the "D" model performs.
>
> 73 de AF4UL Mike
>
>
> -----Original Message-----
> From: owner-yaesu@contesting.com [mailto:owner-yaesu@contesting.com]On
> Behalf Of jbattin
> Sent: Saturday, September 09, 2000 5:10 PM
> To: John L Merrill; yaesu@contesting.com
> Subject: Re: [Yaesu] FT100 advice
>
>
>
> I have had trouble with the hf transmitter quitting and then I blew up the
> reciever with too much RF from my other rig. I now have the D model and it
> seems just fine. Rumor has it that tx and rx problems are not uncommen on
> the earlier rigs. John
> ----- Original Message -----
> From: "John L Merrill" <jmerril1@twcny.rr.com>
> To: <yaesu@contesting.com>
> Sent: Saturday, September 09, 2000 12:04 PM
> Subject: [Yaesu] FT100 advice
>
>
> >
> > I'm considering purchasing an FT100 ($899 at AES). Is this been a fairly
> > reliable radio? Any real bad problems or quirks? Apparently the receiver
> is
> > better than the 706MKIIG.
> >
> > Thanks,
> > John
> >
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/yaesu
> Submissions:              yaesu@contesting.com
> Administrative requests:  yaesu-REQUEST@contesting.com
> Problems:                 owner-yaesu@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/yaesu
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com


<Prev in Thread] Current Thread [Next in Thread>