Hi Rich,
On my FT1000D it clearly states TCXO-1
Thanks
Chris, ZL1CDP
On 2/09/2008, at 4:00 AM, yaesu-request@contesting.com wrote:
> Send Yaesu mailing list submissions to
> yaesu@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/yaesu
> or, via email, send a message with subject or body 'help' to
> yaesu-request@contesting.com
>
> You can reach the person managing the list at
> yaesu-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Yaesu digest..."
>
>
> Today's Topics:
>
> 1. Re: FT-1000D TCXO or TCXO-1? (David J Windisch)
> 2. FT-1000D PTT - Recover problem (npalex@bellsouth.net)
> 3. YAESU FT-857D - RF OUTPUT (Ralph Beverly)
> 4. FT-857D POWWER OUTPUT CONTROL (Ralph Beverly)
> 5. Re: FT-857D POWWER OUTPUT CONTROL (DGB)
> 6. Re: FT-857D POWWER OUTPUT CONTROL (David J Windisch)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 31 Aug 2008 12:11:13 -0400
> From: "David J Windisch" <davidjw@cinci.rr.com>
> Subject: Re: [Yaesu] FT-1000D TCXO or TCXO-1?
> To: <yaesu@contesting.com>
> Message-ID: <3F03718EBA574FFCB2084D3BBCB1C1F6@DavidJWindisPC>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> On page 41, the OPMAN sez the TCXO-1 is +/- 0.5 ppm and the TCXO is
> +/- 2.0
> ppm.
> 73 Dave W8FGX
>
> ----- Original Message -----
> From: "Rich Hallman - N7TR" <rich@n7tr.com>
> To: <yaesu@contesting.com>
> Sent: Thursday, August 28, 2008 11:56 PM
> Subject: [Yaesu] FT-1000D TCXO or TCXO-1?
>
>
>> How do you tell the difference between a TCXO and the TCXO-1 models?
>>
>>
>>
>> Looks like both are marked TCXO...and nothing with the -1 on the
>> TCXO-1
>> model.
>>
>>
>>
>> Thanks..
>>
>>
>>
>> Rich N7TR
>>
>> ex KI3V, N3AMK, WB3JOV
>>
>> www.n7tr.com
>>
>> Telnet: dxc.n7tr.com N7TR DXCluster
>>
>>
>>
>> _______________________________________________
>> Yaesu mailing list
>> Yaesu@contesting.com
>> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 01 Sep 2008 03:13:42 +0000
> From: npalex@bellsouth.net
> Subject: [Yaesu] FT-1000D PTT - Recover problem
> To: yaesu@contesting.com,bmaser@tampabay.rr.com
> Message-ID:
>
> <090120080313.6645.48BB5DE60002CF12000019F522216125569B0A02D2089B9A019C04040A0DBF980A040E9F02@att.net
>
> >
>
> Content-Type: text/plain
>
> Bob,
> If I understood your situation the FT-1000D when operating through
> the AMP the PTT/Audio recover is normal. However when using the
> FT-1000D with the amp off it has a long delay in recovery. I have
> not run into that problem with my FT-1000 but I would suggest the
> following to maybe get a little more information as to possible
> cause. If I remember correctly the FT-1000 non Yaesu amplifier
> relay control is a relay contact, but it has to be activated by
> changing a switch inside the radio. I presume that is the way you
> are keying your amplifier. Several things happen when you press the
> PTT switch, one is that relay is activated, and audio circuits are
> muted to prevent "pops" reaching the speaker during the change
> over. I suspect it is in the audio mute circuit that is causing the
> problem. But since there is seems to be a relationship to the
> connection with the amplifier I would make some checks of the amp
> keying circuit. The simplest is to disconnect the keying cable from
> the amp, substitute another cable to a foot switch or any other
> means of closing the circuit and keying the amplifier. Key the amp,
> then the FT-1000 (with its keying cable disconnected) and see if now
> it hangs up even with the amplifier. If so, then I would
> investigate the radio keying circuit. The only contribution that
> the amplifier should make is there will be a DC voltage available
> coming through the internal relay and that voltage is conveyed into
> the FT-1000 control relay. It should be isolated and not be a
> factor, but you have to start somewhere.
>
> Summary of my thought - Find out if the keying voltage coming from
> the Amplifier has any contribution to the FT 1000 hang-up.
>
> Good luck,
> Norm W4QN
> w4qn@bellsouth.net
> ==================================
> No, because it works fine when the amp is on line. And also all of the
> audio is muted, not even background noise is getting through. I am
> not using an
> amp interface because according to Yaesu it can handle the load put
> out by
>>> the Henry, which is about 160ma @ 24VDC.
>
>>>> ----- Original Message -----
>>>> From: "Bob Maser"
>>>> To: "Yaesu Reflector"
>>>> Sent: Wednesday, August 20, 2008 11:19 AM
>>>> Subject: [Yaesu] FT1000D with a Problem
>
> Hi gang, I am new to this reflector and, since I own a few Yaesu
> radios, I thought it would be wise to join your group.
>
> I have a problem with my FT1000D. I use it mainly on SSB and always
> PTT. When running the radio barefoot, after making a transmission,
> the
> receiverdoes not "unmute" right away. I can see that the rest of
> the receiver
> is working because I see the responding station on my S Meter but no
> audio
> for a few seconds. The longer I have been transmitting the longer
> it takes
> for the audio to come back, and when it does come back, it comes on
> instantly. The strange thing is, when I have the amp on line (Henry
> 4K Ultra) I
> don't have the problem.
> Any suggestions?
> Tnx,
> Bob Maser W6TR
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 30 Aug 2008 11:19:06 -0400
> From: "Ralph Beverly" <Rbeverly@insightbb.com>
> Subject: [Yaesu] YAESU FT-857D - RF OUTPUT
> To: "Reflector Yaesu" <Yaesu@contesting.com>
> Message-ID: <00fa01c90ab3$be9aa780$6501a8c0@2ghzathalon>
> Content-Type: text/plain; charset="iso-8859-1"
>
> To the List:
> After 35 years of hamming, I've decided to go mobile to appease the
> condo-Nazis. I purchased the 857D and installed it in one vehicle,
> with the other one to follow soon. Perhaps I'm just stuck on stupid
> here, but I can not find a way to adjust the power output on a given
> band. My FT890AT and my FT847 both have concentric knobs, with the
> inner one labeled "Mic Gain" and the outer ring labeled "RF Out".
> The 857 has none. I've been through the menus and the closest thing
> I find is Menu 075, a Maximum Output, per Band menu. The manual
> makes no mention (that I can find) about adjusting power output.
>
> It is a must for me to run the rig mobile at a lower power level
> without frying the electronics on the automobiles.
>
> Also, does anyone know what the value represents the displayed
> number in Menu Mode 075? A value is displayed and is supposed to
> represent the maximum power out for each band . But is the value
> expressed as watts or a percentage of maximum power? Page 109 of
> the manual is of no help. For example, if I'm on 6M, and activate
> Menu 075, it displays "50". Fifty what?
>
> Love the size and flexibility of the 857D, but methinks Yaesu has
> crammed a few too many features into the limited space, some at the
> expense of others, like Power Out knob.
>
> de, Ralph W4REB
>
>
> ------------------------------
>
> Message: 4
> Date: Sat, 30 Aug 2008 14:02:43 -0400
> From: "Ralph Beverly" <Rbeverly@insightbb.com>
> Subject: [Yaesu] FT-857D POWWER OUTPUT CONTROL
> To: "Reflector Yaesu" <Yaesu@contesting.com>
> Message-ID: <016801c90aca$99fb8900$6501a8c0@2ghzathalon>
> Content-Type: text/plain; charset="iso-8859-1"
>
> After 35 years of hamming, I've decided to go mobile to appease the
> condo-Nazis. I purchased the 857D and installed it in one vehicle,
> with the other one to follow soon. Perhaps I'm just stuck on stupid
> here, but I can not find a way to adjust the power output on a given
> band. My FT890AT and my FT847 both have concentric knobs, with the
> inner one labeled "Mic Gain" and the outer ring labeled "RF Out".
> The 857 has none. I've been through the menus and the closest thing
> I find is Menu 075, a Maximum Output, per Band menu. The manual
> makes no mention (that I can find) about adjusting power output.
>
> It is a must for me to run the rig mobile at a lower power level
> without frying the electronics on the automobiles.
>
> Also, does anyone know what the value represents the displayed
> number in Menu Mode 075? A value is displayed and is supposed to
> represent the maximum power out for each band . But is the value
> expressed as watts or a percentage of maximum power? Page 109 of
> the manual is of no help. For example, if I'm on 6M, and activate
> Menu 075, it displays "50". Fifty what?
>
> Love the size and flexibility of the 857D, but methinks Yaesu has
> crammed a few too many features into the limited space, some at the
> expense of others, like Power Out knob.
>
> de, Ralph W4REB W4REB@arrl.net
>
> ------------------------------
>
> Message: 5
> Date: Mon, 01 Sep 2008 09:31:27 -0500
> From: DGB <blueheron@Bayland.net>
> Subject: Re: [Yaesu] FT-857D POWWER OUTPUT CONTROL
> Cc: Reflector Yaesu <Yaesu@contesting.com>
> Message-ID: <48BBFCBF.50807@Bayland.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> It is the expressed as the value in watts out.
>
> Ralph Beverly wrote:
>> After 35 years of hamming, I've decided to go mobile to appease the
>> condo-Nazis. I purchased the 857D and installed it in one vehicle,
>> with the other one to follow soon. Perhaps I'm just stuck on
>> stupid here, but I can not find a way to adjust the power output on
>> a given band. My FT890AT and my FT847 both have concentric knobs,
>> with the inner one labeled "Mic Gain" and the outer ring labeled
>> "RF Out". The 857 has none. I've been through the menus and the
>> closest thing I find is Menu 075, a Maximum Output, per Band menu.
>> The manual makes no mention (that I can find) about adjusting power
>> output.
>>
>> It is a must for me to run the rig mobile at a lower power level
>> without frying the electronics on the automobiles.
>>
>> Also, does anyone know what the value represents the displayed
>> number in Menu Mode 075? A value is displayed and is supposed to
>> represent the maximum power out for each band . But is the value
>> expressed as watts or a percentage of maximum power? Page 109 of
>> the manual is of no help. For example, if I'm on 6M, and activate
>> Menu 075, it displays "50". Fifty what?
>>
>> Love the size and flexibility of the 857D, but methinks Yaesu has
>> crammed a few too many features into the limited space, some at the
>> expense of others, like Power Out knob.
>>
>> de, Ralph W4REB W4REB@arrl.net
>> _______________________________________________
>> Yaesu mailing list
>> Yaesu@contesting.com
>> http://lists.contesting.com/mailman/listinfo/yaesu
>>
>>
>
>
> ------------------------------
>
> Message: 6
> Date: Mon, 1 Sep 2008 10:54:00 -0400
> From: "David J Windisch" <davidjw@cinci.rr.com>
> Subject: Re: [Yaesu] FT-857D POWWER OUTPUT CONTROL
> To: "Ralph Beverly" <Rbeverly@insightbb.com>, "Reflector Yaesu"
> <Yaesu@contesting.com>
> Message-ID: <4407B0BE7FE44793813646C9365ED74E@DavidJWindisPC>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> IIrc, you turn the main tunung knob in that menu to vary power. 73
> Dave
> W8FGX
>
> ----- Original Message -----
> From: "Ralph Beverly" <Rbeverly@insightbb.com>
> To: "Reflector Yaesu" <Yaesu@contesting.com>
> Sent: Saturday, August 30, 2008 2:02 PM
> Subject: [Yaesu] FT-857D POWWER OUTPUT CONTROL
>
>
>> After 35 years of hamming, I've decided to go mobile to appease the
>> condo-Nazis. I purchased the 857D and installed it in one vehicle,
>> with
>> the other one to follow soon. Perhaps I'm just stuck on stupid
>> here, but
>> I can not find a way to adjust the power output on a given band. My
>> FT890AT and my FT847 both have concentric knobs, with the inner one
>> labeled "Mic Gain" and the outer ring labeled "RF Out". The 857
>> has none.
>> I've been through the menus and the closest thing I find is Menu
>> 075, a
>> Maximum Output, per Band menu. The manual makes no mention (that I
>> can
>> find) about adjusting power output.
>>
>> It is a must for me to run the rig mobile at a lower power level
>> without
>> frying the electronics on the automobiles.
>>
>> Also, does anyone know what the value represents the displayed
>> number in
>> Menu Mode 075? A value is displayed and is supposed to represent the
>> maximum power out for each band . But is the value expressed as
>> watts or
>> a percentage of maximum power? Page 109 of the manual is of no
>> help. For
>> example, if I'm on 6M, and activate Menu 075, it displays "50".
>> Fifty
>> what?
>>
>> Love the size and flexibility of the 857D, but methinks Yaesu has
>> crammed
>> a few too many features into the limited space, some at the expense
>> of
>> others, like Power Out knob.
>>
>> de, Ralph W4REB W4REB@arrl.net
>> _______________________________________________
>> Yaesu mailing list
>> Yaesu@contesting.com
>> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
>
> ------------------------------
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
> End of Yaesu Digest, Vol 69, Issue 1
> ************************************
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|