Yaesu
[Top] [All Lists]

[Yaesu] FT1000MP overheating and audio failure

To: <yaesu@contesting.com>
Subject: [Yaesu] FT1000MP overheating and audio failure
From: "Robert Shohet" <kq2m@earthlink.net>
Date: Mon, 28 May 2018 14:57:24 -0400
List-post: <mailto:yaesu@contesting.com>
Hi,

While operating the WPXCW contest this weekend, on Friday night my left 
FT1000MP began to become warmer than the right radio.  Since I have some 
antenna controllers partially blocking some of the vents on the top of the 
chassis, I didn’t think much of it until the radio did not seem to want to cool 
off after I moved the controllers away from the vents.  I thought that this was 
odd since I wasn’t transmitting with the left radio – and by contrast, the 
right radio was cool even though I was transmitting on it almost continuously.

Then, all of a sudden, the left radio shut off by itself!  I pushed the on 
button and it would not turn on.  Then after ~15 minutes, I was able to turn it 
back on.  But it stayed very warm.  Hmmm...  This annoying process repeated 
more and more frequently on Saturday morning – turning itself off and then 
having to wait about 15 minutes before I was able to turn it back on.  Finally, 
the radio failed and when I turned it back on, there was NO audio and the swr 
was infinite!

Realizing that there could be many potential failure points, I took the coax 
from the left radio and hooked it up to the right radio and everything was fine 
– swr was low, the left amp worked at full power and everything was normal.

Then I took the coax from the right radio and plugged it into the left radio 
and the swr was infinite with NO audio.

Clearly the left radio had the failure not the amp or coaxial cables.

Does anyone know what might have failed and what needs to be fixed?

Tnx & 73

Bob, KQ2M 

kq2m@kq2m.com
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
<Prev in Thread] Current Thread [Next in Thread>