Search String: Display: Description: Sort:

Results:

References: [ +from:Gudguyham@aol.com: 815 ]

Total 815 documents matching your query.

81. Re: [Amps] AC wiring (score: 1)
Author: Gudguyham@aol.com
Date: Thu, 20 Oct 2005 08:56:42 EDT
I've got a 1500W space heater but I run it on the lower power setting (900W) because i'm afraid the 1500W setting would burn the house down as it is fed with #14 on a 15A circuit. Have a look at the
/archives//html/Amps/2005-10/msg00489.html (8,360 bytes)

82. Re: [Amps] AC wiring (score: 1)
Author: Gudguyham@aol.com
Date: Thu, 20 Oct 2005 09:02:07 EDT
I agree with you Tony. I ran a new 240 VAC circuit for my Alpha which specifies 20A. I used 10 AWG for the run to ensure least voltage drop over the 100 foot path from the mains panel and put it on a
/archives//html/Amps/2005-10/msg00490.html (8,566 bytes)

83. Re: [Amps] AC wiring (score: 1)
Author: Gudguyham@aol.com
Date: Thu, 20 Oct 2005 10:21:43 EDT
I use two Alphas on one circuit run. But, I have to plug & unplug depending on which amp I'm using. Here's a question for the NEC experts out there. Since I only use one amplifier at a time, can I pa
/archives//html/Amps/2005-10/msg00498.html (8,833 bytes)

84. Re: [Amps] AC Wiring 400 amp (score: 1)
Author: Gudguyham@aol.com
Date: Thu, 20 Oct 2005 12:38:29 EDT
Gentlemen, may I make an addition to the AC wiring notes. It took a little talking to the power company but I had them install a 400 amp transformer on my pole in front. It has a 380 amp commercial r
/archives//html/Amps/2005-10/msg00511.html (6,910 bytes)

85. Re: [Amps] AC wiring (score: 1)
Author: Gudguyham@aol.com
Date: Fri, 21 Oct 2005 16:18:58 EDT
A few years ago, I ran 4-pole 240VAC with #10 over a 60-foot run for this run? also... What rating was the recepticle you terminated the run with? _______________________________________________ Amps
/archives//html/Amps/2005-10/msg00518.html (8,638 bytes)

86. Re: [Amps] AC wiring (score: 1)
Author: Gudguyham@aol.com
Date: Fri, 21 Oct 2005 16:25:25 EDT
I agree with you Tony. I ran a new 240 VAC circuit for my Alpha which specifies 20A. I used 10 AWG for the run to ensure least voltage drop over the 100 foot path from the mains panel and put it on a
/archives//html/Amps/2005-10/msg00519.html (8,400 bytes)

87. Re: [Amps] AC wiring (score: 1)
Author: Gudguyham@aol.com
Date: Sat, 22 Oct 2005 06:46:52 EDT
I have a question about the wire size issue. I have one Alpha at shack that they draw over 11 amps (at 240 volts), assuming 1500 watts out. What is the need for over a 20 amp circuit, assuming a norm
/archives//html/Amps/2005-10/msg00530.html (8,619 bytes)

88. Re: [Amps] AC wiring (score: 1)
Author: Gudguyham@aol.com
Date: Sat, 22 Oct 2005 06:58:26 EDT
After that I did some research on FPE, and found there were know problems with their breakers not opening under a serious fault. I had the panel replaced within the month. 73, Rob, NC0B Hi Rob, these
/archives//html/Amps/2005-10/msg00531.html (8,619 bytes)

89. Re: [Amps] Titan 425 amp (score: 1)
Author: Gudguyham@aol.com
Date: Mon, 31 Oct 2005 07:59:16 EST
Hey Guys got a Problem Got the Titan hooked up and seems to be working fine except for one thing. I get full output power good plate current. But the grid current deflects when I talk on SSB But Idle
/archives//html/Amps/2005-10/msg00714.html (8,385 bytes)

90. Re: [Amps] 220V wiring: Was Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Tue, 15 Nov 2005 20:20:33 EST
Your safest bet is to run 4 conductor wire and outlets. All new ranges and dryer circuits must be 4 wire. As far as I am concerned, all new amplifier circuits should be too. Mike, W1NR Many amps like
/archives//html/Amps/2005-11/msg00204.html (7,156 bytes)

91. Re: [Amps] Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Tue, 15 Nov 2005 20:24:53 EST
I always want to know a neutral isn't hot unless it's going to a switch leg which I think is the only NEC exception to the rule. Best, Will If a "white" wire is hot, it is not a neutral. So a neutral
/archives//html/Amps/2005-11/msg00205.html (8,915 bytes)

92. Re: [Amps] Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Tue, 15 Nov 2005 20:39:52 EST
Safety ground should never carry current. 73 Gary K4FMX RIGHT ON GARY!!!!! _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/li
/archives//html/Amps/2005-11/msg00207.html (8,545 bytes)

93. Re: [Amps] Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Tue, 15 Nov 2005 20:46:01 EST
In a switch leg using say 12-2 or 14-2 romex, the white wire is hot at the switch. The white and black tie together in the junction box of the light fixture, and the black off the switch goes to the
/archives//html/Amps/2005-11/msg00208.html (8,752 bytes)

94. Re: [Amps] 220V wiring: Was Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Wed, 16 Nov 2005 09:55:26 EST
In a SB-220 or a TL-922, it's Yes, yes, yes! because there is no connection between the 120v fan and either side of the 240V input. Instead, the fan is powered by one of the 120v primaries of the xfm
/archives//html/Amps/2005-11/msg00241.html (7,592 bytes)

95. Re: [Amps] 220V wiring: Was Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Wed, 16 Nov 2005 09:58:32 EST
Neutral is intended to carry current (although it is not used in the 240 volt circuits in homes). Ground is a PROTECTIVE conductor that should NOT carry current except in the case of a fault. (A faul
/archives//html/Amps/2005-11/msg00242.html (8,501 bytes)

96. Re: [Amps] 220V wiring: Was Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Wed, 16 Nov 2005 10:02:25 EST
As is normal- I do not take much that Measures says as gospel- How many pieces of equipment, wired for 220 or 240, have you seen that have internal 120 usage? I have one dryer that has a 220 heater a
/archives//html/Amps/2005-11/msg00243.html (8,367 bytes)

97. Re: [Amps] Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Wed, 16 Nov 2005 10:11:49 EST
That is unless you have two sets or cables into the same switch box where you'd be breaking the black of both cables and the white running straight through like a two way switch for a hall lamp using
/archives//html/Amps/2005-11/msg00244.html (9,304 bytes)

98. Re: [Amps] Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Wed, 16 Nov 2005 10:13:45 EST
There are no color coded terminals on switches. 73 Gary K4FMX On a single pole switch there is not. On a 3 way one screw is dark to indicate it is the pivot or common terminal of that switch. A 2 pol
/archives//html/Amps/2005-11/msg00245.html (9,037 bytes)

99. Re: [Amps] Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Wed, 16 Nov 2005 10:19:56 EST
You can mark any wire any color you wish to and use it as the color you have marked it and it is perfectly acceptable. 73 Gary K4FMX except for a green wire. _________________________________________
/archives//html/Amps/2005-11/msg00246.html (8,798 bytes)

100. Re: [Amps] Question about safety ground connection (score: 1)
Author: Gudguyham@aol.com
Date: Wed, 16 Nov 2005 10:16:35 EST
It could be due to leakage to earth or it could be a path through your body to earth if you come in contact with the hot lead. Or it could be if the hot comes in contact with the ground lead. A GFI w
/archives//html/Amps/2005-11/msg00247.html (8,965 bytes)


This search system is powered by Namazu