Yes, ~2v. -- Original Message -- From: "Steve Hunt" <steve@karinya.net> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com> Sent: Sunday, January 06, 2008 10:45 AM Subject: [TenTec] Omni VI
When I got home and turned on the rig this evening the Orion instead of booting up began flashing on and off with the screen and all the lights. Its as though it was signalling to me, but I let it go
When this happens and it's annoying try varying the bandwidth up and down while the notch (AN) is on. This usually does the trick. If its not annoying leave it alone and at some point the carrier eit
There's no problem getting any power from gensets and batts. to drive your 120Vac gear especially if theyre of the newer sine wave inverter genre. The Centurion using 220Vac is a bit off the current
A Schumacher 'Speed Charge' should suit your needs. Available at Wallmart for ~$25+tax, is a 'Computer Smart' non linear charger that lives <1' from my Jupiter, which uses a non linear PS TT963 which
Paul, it is selectable in 2, 4, and 6amp. There is an led charge status feature that stays mostly on the last light which indiacates its charged. You can hear the little guy ramp up and feel the fan
"Since then, I canīt hear anything on my second receiver. Only noise. What can I do?" Bernhard, Same thing happened to me. I was told to send it in for repair to TT. Ben K8DIT
Thanks for the note Bernhard. I will reserve my estimation of the Orion until I learn more about it. It took me a full year to begin to appreciate the Jupiter. While something appears not to work cor
(http://www.a-aengineering.com) Alan, Ive been using an AGM type deep cycle battery. I first bought one of these with a rating of 100AH and found that it was having trouble keeping up with any use m
Are there any schematics for the Orig. Orion posted anywhere? Im in need of the Power Board schematic. My Orion's power board failed and need a parts list of the smaller components in order to repair
Alan, Its usually the power chord. Seating and reseating or just cleaning the contacts can make a difference. The other possibility within your powerchord from the p.s. to the rig is the plug itself,
I used the Omni VI/opt1 and Jupiter alternately for about 4 years. It took 2 years for me to understand how to use the Jupiter succinctly so that I gradually found out how to use it best. I wound up
The 701 handmic. The original old handmic. is the 700. I use the 701 stock handmic. on my Scout, Jupiter and Orion. I have the 705. Ive tried several others. But theyre all good, the 701 is, well, ju
Bob, With the TT handmic. 701 mic gain at 11 o'clock. Your mouth 2" from the mic. should be fine. If your audio is muffled its because you're not doing something correctly. There's nothing wrong with
I got it! V2 is on the 0riginal Orion! EZ to do! The S meter is different. YMMV as you go from 1.xxx to 2.xxx but I am posting to let everyone know that it worked for me. So it is doable and it works
Tim, While the meter on the Orion is very good, it was explained not long ago that there are mechanical variances from one to another and just a whole host of reasons why a electromechanical meter of
Hi Don, If you look at the Paragon you see that processors have begun to 'take over' for some of the functions of things like bandswitches, frequency stability and frequency selection which begin to