For Sale ORION 565 Top Shape, Filters. Rig looks New, works perfectly with no issues. All filter slots filled. Running Latest firmware Version 3.032.(April 2012-not sure if there is a newer version)
i have set Reference oscillator , and the BFO's on the rig. Rig is on frequency as discussed a week or so ago. My issue is this. USB sounds great on transmit. LSB, however, is thin. Narrow, like you
Thanks, Ken. Yes, my first job was to set the bfo's correctly, at least LSB, USB and CW transmit...got them within one Hertz. I had to mal adjust the FSK bfo's in order to get the other 3 on freq...(
Bob, How do you adjust FK low and High? To get to fsk you hit fsk and CW, then tune to transmit. OK, then adjust appropriate cap for fsk low. If you then adjust appropriate cap for FSK high is their
Pete, I am using the one which the manual refers to as LSB rtty receive. There are 5 there. One for FSK low one for FSK high LSB rtty receive USB CW or tune Transmit (Bob advises that to adjust fsk l
Greetings. I recently got a Paragon II and it was out of adjustment. (Formerly belonged to Federal Highway Dept?) I set BFO's as well as possible. Basically has to set fsk bfo's off a bit to get the
Hi again, Bob. Yes I did my settings while at 14 mHz and that's where I had the rig from the start. Set it up just as you did, had it on an hour or more, and lid on, replaced after any adjustment. We
My clock in Paragon II was acting goofy, wierd symbols, clock quit each time I shut off rig, so I located a chip-DS 1287A+ which was purported to be direct replacement. Installed it, KNOWING it had a
Peter, the build dates are on the front of the chips, so I made sure of that. Rig has 1287 in it, I got a 1287a+. It DID have an extra pin. I will locate a 12887 and try that. Thanks. k8vf
List it on qth.com, state the price and condx-be accurate, state price, and only sell to someone with good FEEDBACK. I have probably sold 100 radios in the last 10 years. NEVER had a shipping issue,
I have a 217 filter and a 220 ten tec filter available. Both guaranteed to be working 100%. 217 is a newer style, 8 pole. $65 each shipped. $115 shipped for the pair to CONUS. Best Holiday wishes, Ma
I would contact them and let them know that the noise is gone since they repaired the pole problem. maybe it will wake someone up. Even if it does not, they need to know that they have a responsibili
I think you'll like it (V-1)better ,John. Especially on noisy 160/75 meter bands. You'll like the way you can: 1-Set NR for 2-3, 2-add attenuator till "S" meter is at Zero, 3-And listen to nothing at
Up for sale or trade is my ORION 565AT. # 06c10753-UPDATED DEC. 2004! Factory tuner installed. It is in mint, unmarked condition, and working 100% May be operated with V-1 or V-2 firmware. I prefer V
Clark has it right. ALSO, sometimes the encoder connector gets a light coating of ??? on it which you can clean off . Try working the connector on and off a few times. It fixed my 2000 PLUS and saved