Bob, How do you adjust FK low and High?
To get to fsk you hit fsk and CW, then tune to transmit.
OK, then adjust appropriate cap for fsk low.
If you then adjust appropriate cap for FSK high is their some other
procedure to add, or do you just move to high cap and adjust cap?
Reason I ask, is because you will be at your previous setting for FSK low.
Then it says RTTY receive LSB is 90003000. This is merely LSB receive
setting, correct? Had no problem here.
had no problem at USB at 9000000 or CW Transmit at 90007000.
I had lsb USB and CWT all ok, figured all would be ok.
Thanks for the guide on fsk hi/low.
----- Original Message -----
From: "Robert Mcgraw" <rmcgraw@blomand.net>
To: "Mark Kenward" <k8vf_mark@centurytel.net>; "Discussion of Ten-Tec
Equipment" <tentec@contesting.com>
Sent: Monday, April 07, 2014 9:01 AM
Subject: Re: [TenTec] Paragon II LSB/USB audio differences.
The BFO oscillators likely need alignment. Follow the sequence in the
manual.
73 Bob, K4TAX
i have set Reference oscillator , and the BFO's on the rig.
Rig is on frequency as discussed a week or so ago.
My issue is this.
USB sounds great on transmit.
LSB, however, is thin. Narrow, like you are talking through a 1.8-2.1 kHz
filter.
I tried another 2.4 filter in 9mHz slot, with no change.
Can someone tell me what to adjust to move the USB and LSB transmits more
to the center of their respective ranges.
I am happy with the rig so far, but it is obvious that LSB needs an
adjustment, and of course, it is not the BFO.
I have a friend who wants the rig, and I would like to make it perfect
for him.
Thanks for any help.
Mark
K8VF
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
--
Disclosure:
I am a Tentec Ambassador and compensated according to the Tentec
Ambassador plan. I serve as a volunteer beta test person for the Omni
VII, Eagle and Argonaut VI products. Otherwise, I hold no business or
employment interest with Tentec.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|