Well they finally built a radio that's beyond understanding. I can see the new Extra Class exam: Q: What is the function of the DSP stage? 1. Makes the radio sound better 2. Everything George says ab
It needs to be balanced. Put a quarter wave counterpoise on the dot contact and a half wave on the dash side of that bug. If too many dits, try shortening the dit wire a bit. Steve N4LQ -- Original M
Guys. This is why I use a Windom antenna. It's designed for CW. One side being longer than the other eliminates the huge loss of dits found in simple dipoles. It might also prevent the extra dit prob
The Herc II will work with anything but you won't have the automatic bandswitching capability unless the rig has a band info output. This means you must change bands on the Herc manually by simply tu
There's a KR-5 keyer on Ebay. I've never seen a TT keyer with no paddles before. I seen lots of KR-5A's but not this job. I appears that it has a jack in place of the paddle and no straight key butto
I wonder if you guys could give us a description of your antenna and feed line? Once I burned up a torroid coil in a TS-940's tuner trying to load an 80m dipole on 160m. The tuner was seeing a very l
Looking at the QST review, can someone tell me how the knob is connected to the inductor and how turns are counted? Look like nothing is there! Steve N4LQ
I don't understand you guys. I have here on my shelf a beautiful BLACK Omni C. All the old OMNIs were black along with the matching HERCULES, TUNER and event he huge power supply. A little aluminum t
Check these whities. http://www.rigpix.com/yaesu/ft107.htm JAPAN http://www.rigpix.com/swan/cubic_astro150a.htm (USA) http://www.rigpix.com/teltow/215c.htm Rep. Germany
Ed: Maybe you should offer a $200 rebate and a 0% interest loan for 60 months. That rig should win the award for the "Most Advertised". Steve To: <tentec@contesting.com>
Alan. The best I can tell is that tuner was for single or coax line output so it wouldn't have a balun for balanced output. Impedance range is unknown and no SWR provisions were included. Steve Ellin
Perhaps the microprocessor in the DSP is the culprit for the high power consumption. I never considered the Argo V, K2 or 2020 to be true QRP rigs. To me, a QRP rig is one that is simple to build, ve
Like most of us, we are interested in ALL TenTec products but we don't want to belong to 18 different reflectors. Now everyone wants to be Mr. Moderator I suppose and all it accomplishes a inflated e
Scott: Welcome to the internet. It's a dangerous place for a manufacture. One thing I like about it is the freedom of expression. You and Tim have both exercised this privilege. When I first saw TenT
Ben Thanks for your support. Due to my limited vocabulary, I have no idea what you're trying to say but I'm glad you appreciate good reading. Steve --Original Message-- From: "Ben K8DIT" <benk8dit@se