most of my AP's either route or are just dumb bridges. I don't think they are powerful enough to handle the NAT. -- Original Message -- From: "Steve Deaton" <steve@texasbb.com> To: "'Norm Young'" <np
I think I've checked most all of the CPE's I'm having problems with. They all have 4.43K installed. coincidence? 4.43 while the timeouts tried 35 minutes. The 10% many disabled
I have seen the same. So...I'm totally screwed. I'm not going to change out 30 subs antenna or overamp the sector to get the "greater than 15db" SNR. Turn off polling and what's the big advantage to
The problem that I am seeing is not only dropped pings on links with perfect SNR (25?) but complete outages for the CPE for a few minutes, sometimes. This is affecting multiple sites. Time for some s
I thought you said some time ago that you had it running in your lab on an Ap2000 or something but were waiting on Proxim to make a deal with you. I know we had this conversation before, even on this
Do you think NMIS is better than Nagios/Netsaint? It does appear that NMIS integrates the graphing and reporting functions nicely but how well does it do monitoring and how much of a PITA is it to se
The karlnet configurator works just dandy. I have 4 AP1000 (1 base and 3 satellite on 3 differrent building).All use 2 cards, one turbo cell and the other as an ap. How can I monitor who connected fr
I was going to ask a similar question. I've heard others using the Motorola Canopy power injectors but they are setup for -4/5 +7/8. Does this work? PoE
Where are the upgrades ? I don't see them on the license-it.com site or the karlnet.com site. -bob _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://li
I'm interested. Thanks, Bob Hrbek jagWIRELESS software on a Senao (Engenius) NL-2611CB3 PLUS excl. TC licence) unit wich, in my point of view, would be an ideal indoor CPE device. it includes a 11 dB
"so this guy goes into the doctor and says "hey doc, it hurts when I do this".....so the doc says "don't do that"." use Orinoco cards if you want real SNR use SEANO cards if you want long distance. _
Simple question. Will the Engenous 2511CDEXT 200mw card work in a KN50 in turbocell mode? If not, will any 200 mw card work in the KN50's? Thanks. _______________________________________________ Karl
802.11b not TC in TC mode...it works I am reposting this.. Because the last message I read said that someone was using prism cards in KN-50's !!! 1. not right now 2. no 3. it won't - kn-50 is TurboCe