I need a flashrom setup to handle a growing cell site. I have about 50 clients on a KN-200 board ( at least I think it is...it's the one with two PCMCIA interfaces). We upgraded from and AP-1000 when
Yeah, the KN-200 is better, but maybe you should just skip the kn-200 step altogether if you can find a stable Flashrom setup. I saw a huge performance increase with the upgrade. -bob -- Original Mes
NO, flashrom is not CF flash. It is a PC setup with an ethernet card and a FLASHROM plugged into it that has the boot code on it. You've probably never even paid attention to many of the older ethern
It is my understanding that the newer versions of Karlnet updated the flash on the Orinoco cards to the preferred level during boot. I believe the hardware is all the same on the silver cards, old or
I believe it is 4.43K. I should probably upgrade huh? _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
Which Soekris boards do you support? The 4801? The 45xx is only a 133Mhz processor.....might as well use the KN boards unless they are still having temp issues ;) -bob -- Original Message -- From: "K
so what is the $250 CPoE-RSU-ANT? integrated antenna? _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
maybe this is a stupid question but .....you had the hardware built to your specs.....right? Why not put enough rom on the board to handle today and the future? -bob -- Original Message -- From: "Kev
I tried throttling on the CPE (rg-1000 w/ SR-4100) and it was a HUGE failure. This was in the early 4.x code (probably 4.02 or something). There was ZERO granularity in speeds, it was full speed or n
either or wireless or Ethernet, it didn't matter. nothing. karlnet _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listin
I've seen the same exact think on my first 3 KN-50 installs. I replaced the Dell cards all three times with older silvers and the links went from marginally working to working perfectly. Karlnet....y
I have also seen the reboot/lockup issue upon management access via the wireless interface. This is really a problem as we design our networks with public space for the users and private for the CPE'
The other issue is: units lockup when accessed for management via wireless interface _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.
Don't use the same spectrum for backhaul as you to your PtMP setup. 2nd Have twice the bandwidth that you'd like to deliver, available in the radio. You can't go wrong. (yeah...so you still could....
all bridged? relay is _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
I think you'll regret not routing. I think once you get to about 25 users, routing will have some serious benefits. at central my to _______________________________________________ Karlnet mailing li
Drop in some MicroTik boxes where you can. see free, ~3.4 service my it. because relay our I above here? _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com htt
Nope, they all suck. if you replace the installed card with a lucent silver/gold, they work MUCH better....still about 25% packet loss. I can't believe that these things ever got away from Karlnet li
Are you on an omni? tower These about those and _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet
it kinda works for me. That _______________________________________________ Karlnet mailing list Karlnet@WISPNotes.com http://lists.wispnotes.com/mailman/listinfo/karlnet