Amps
[Top] [All Lists]

[AMPS] SB-220

To: <amps@contesting.com>
Subject: [AMPS] SB-220
From: philk5pc@connect.net (Phil Clements)
Date: Thu, 19 Jun 1997 11:12:56 -0500
At 10:59 AM 6/19/97 +0000, you wrote:
snip.....
>I know a guy who went through dozens of  3CX1200D7's because he would 
>turn his PA OFF after tuning, and between QSO's. It was the only case 
>of repeated open filaments I ever saw in that tube. He went through 
>one tube every year or so.

That guy chose the wrong tube for his operating style...had he chosen
3-500Z, 3-1000Z, oe 4-1000A, he would still most likely be on his
original set. My comments were strictly limited to the SB-220. All
bets are off on the ceramic tubes. I still step-start my 8877's, even
though not required. My line voltage here is high and stiff!

(((73)))
Phil, K5PC

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>