[AMPS] blowers

[Peter.Chadwick@gpsemi.com (Peter Chadwick)]

I was told that the only way you can damage a tube with too much air is if
you physically blow it out of the socket..............

But if you cut up a cardboard box and mount the tube socket and a candidate
blower on it, you can use a manometer to check if the blower is good/quiet
enough for the job under something close to real conditions, without the
cost and trouble of cutting metal.

73

Peter G3RZP

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm