.........
>I would also try and obtain schematics from Command, Emtron and any other
>company that is using the Svetlana 4CX1600B. There should be excellent
>information on no hassle input circuits, protection, etc.
>
- No hassle HF input circuits dismiss the importance of neutralization.
With a grid termination R of 12.5 ohms, no problem With a grid
termination R of 50 ohms, maybe no problem. With a grid termination R of
200 ohms, good luck. With 450 ohms, enjoy the ride.
- Eimac says that neutralization can be important in grid driven
linear service, and, as an added bonus, neutralization results in a
virtually perfect input swr. The neutralization circuit is simpler
than most folks seem to expect. {Figure 5 at www.vcnet.com/measures}
cheers
Rich...
R. L. Measures, 805-386-3734, AG6K
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|