Amps
[Top] [All Lists]

[AMPS] ARCING MORE

To: <amps@contesting.com>
Subject: [AMPS] ARCING MORE
From: CATALANO_DENIS_E@hq.navsea.navy.mil (CATALANO_DENIS_E@hq.navsea.navy.mil)
Date: Wed, 15 Apr 1998 08:01:07 -0400
     Thanks to Pete (N4ZR), Carl (KM1H), Jordan,  and Rich (AG6K) for 
  replying to my message.  I opened the amp up last night, and found 
  several of the tuning capacitor plates pitted and/or melted.  Four of 
  the plates have minor pitting, while three of the plates are actually 
  deformed (melted) at the edges where the plates start to mesh.  I 
  guess I will try the filing method, or maybe see if Tentec would sell 
  replacement plates.
                                          TNX, Denis, W4DC

______________________________ Forward Header __________________________________
Subject: ARCING
Author:  CATALANO_DENIS_E at P-CLA_1
To: <amps@contesting.com>
Date:    4/14/98 8:30 AM


     
     
     Greetings.  I have a TENTEC Centurion (pair of 3-500Z) that has worked 
     great for several years.  Used it this weekend to work the H40 on 
     RTTY.  Although I worked the H40, the amp started arcing (because of 
     operator error/wrong antenna/you name it!).  Anyway, now when I drive 
     the amp to full power with correct load, it arcs - all bands.  It 
     looks like the arcing is in the big tuning capacitor.  It sounds like 
     a spark-gap transmitter.  It does it whenever I drive it over 400W.  I 
     haven't opened it up yet, so want to get some ideas of what to look 
     for, and possible repair ideas.  
     
                                           TNX & 73 Denis, W4DC

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>