[AMPS] Triode Amp Out/In isolation

[Shawn Tayler" <stayler@powernet.net (Shawn Tayler)]

Hi,

Doing some teswting on my 8938 Stripline (K1FO) design amplifier and found the 
output to input isolation (at 
tuned frequency to be 14dB.  This is about the operational gain of the amp.  
The isolation is over 50dB andf 
even exceeds 80dBat all other freqs from 100Khz to 1Ghz.  Is this an ok figure 
for a GG triode amp?  Its always 
been stable during normal use, never a snap, crackle, or pop...

Comments...Insight?



de Shawn
 N7LQ (formerly WB7TDI)

The N7LQ station will be on from DN01fa for June VHF QSO '98
50-2304Mhz, 432 EME capable.....Hope to hear you on!!!!





--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm