On Thu, 28 May 1998 11:46:56 -0700 Vic Rosenthal <rakefet@rakefet.com>
writes:
>I have the following problem with my SB-1000: Although the plate
>circuit tunes 18 mhz
>in the 21 mhz position and 24 mhz in the 28 mhz position, it's not
>possible to adjust
>the input tuned circuit so that the input swr on both 18 and 21 or 24
>and 28 mhz will
>be acceptable to my exciter. So, for example, if I adjust the input
>coil for a good
>swr on 21 mhz, the swr on 18 mhz is too high.
The rest snipped...
Why not just duplicate the almost clone post WARC AL-80A circuit? Dunno
if there is even a difference but at least ask about it. Also the early
AL-80A blew plate chokes on 17M so watch your clone.
73 Carl KM1H
_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|