At 11:35 AM 8/7/98 +0008, George T. Daughters wrote:
>hmmm. 2650 v @ 0.32 a = 848 watts from the HV supply, and say 100 of
>so-called "feed thru" power from the 756 exciter = 948 watts...
>
>and you're getting as much as 1150 out!! i'd say it's
>working really well! the efficiency is over 100%!
Yes, George! I am thinking about selling some of the excess power back to
my local electric utility.
Seroiusly, the plate current meter indicates only the average current. I
would think my peak current is significantly higher than 320 mA.
I should probably provide a DC carrier measurement for comparison and
efficiency measurement. I'll do this tonight.
Thanks for responding.
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|