Greetings,
Just picked up an SB-200. The TS-450 has a 7-pin DIN plug to use for an
amplifier, but no usable information (unless it's hooking up a TL-922--go
figure!!) in the manual and the schematic is _very_ small--got to get my
eyes tested...
Pin 6 on the remote jack is the ALC line--can anyone shed some light on the
correct wiring? Can the TS-450 handle the keying currents or is a soft-key
modification needed?
TU es 73 de Tom, K4NR
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|