Amps
[Top] [All Lists]

[AMPS] Kenwood TS450 & SB-200??

To: <amps@contesting.com>
Subject: [AMPS] Kenwood TS450 & SB-200??
From: measures@vc.net (Rich Measures)
Date: Thu, 13 Aug 98 20:10:53 -0800
>
>Greetings,
>
>Just picked up an SB-200.  The TS-450 has a 7-pin DIN plug to use for an
>amplifier, but no usable information (unless it's hooking up a TL-922--go
>figure!!) in the manual and the schematic is _very_ small--got to get my
>eyes tested...
>
>Pin 6 on the remote jack is the ALC line--can anyone shed some light on the
>correct wiring?  

(Relay Control Line) Pin 2 is hot.  Pin 4 is gnd.  2 shorts to 4 on Tx.  

>Can the TS-450 handle the keying currents 

... probably.  The long term problem is that the SB-200's relays are 
slower than a TS-450.  The long term fix is to install high speed 
switching in the SB-200.  See Fig. 7B on my Web site -  or the Jan. 1994 
issue of *QST*.  
>......
later, Tom.  



Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>