[AMPS] Tuned input

[km1h@juno.com (km1h@juno.com)]

On Mon, 9 Nov 1998 09:35:25 -0800 (PST) PD Wintheiser <w0opw@yahoo.com>
writes:
>
>---Will K6NDV <k6ndv@contesting.com> wrote:
>>
>> 
>> I need to tune the input circuit on my SB 220.
>> I have seen something about this in the past on the reflector.
>> Please give me some idea's about the easiest/safest way of doing 
>this.
>> Thanks Will
>> 
>  My SB200 needs to have input retuned also.  Anyone out there have
>experience on re-tuning the frozen slugs ?
>    Pat W0OPW


I still tune by the manual...works fine if you pay attention.

You can free slugs with a bit of lacquer thinner or heat. The heat can be
applied via a home made soldering gun tip bent to fit....just a tiny bit
will ususally do the job.

73  Carl  KM1H


>_________________________________________________________
>DO YOU YAHOO!?
>Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm