Amps
[Top] [All Lists]

[AMPS] painting 19 inch rack panels

To: <amps@contesting.com>
Subject: [AMPS] painting 19 inch rack panels
From: wb8jkr@juno.com (Mark S Graalman)
Date: Wed, 23 Dec 1998 21:53:31 EST
  I've always given them a work over with a 400 grit
emery cloth or fine steel wool, then wipe down with alcohol
 before painting, always get a nice tight finish.

Mark  WB8JKR


On Wed, 23 Dec 1998 17:58:16 -0800 zeitler@ibm.net writes:
>
>Reflectees,
>I have some new 19 inch rack panels that are in need of paint. They 
>have
>never had any paint or primer. They are shiney metal. These are all 
>aluminum
>except for one. Is there a spray on product that will stick or do I 
>HAVE to
>prime them first?? I would prefer to just get a spray can of the right
>"stuff" and do it all in one evolution.
>
>Lane Zeitler
>KM3G
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>