Why not try to get the meter fixed. Try a good instrument repair shop. There
is one here in Spokane that rebuilds meters. Worth a try. Even if it costs
more than the Harbagh replacement. I'm sure that Rich or Carl could tell you
what the meter current sensitivity is...
73 and glad you found the problem...
Jim W7RY
-----Original Message-----
From: Walter Fairclough <wfairclo@netcom.ca>
To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: Wednesday, December 30, 1998 12:58 PM
Subject: Re: [AMPS] SB-220 Problems
>
>Thanks for all the input fellas. Yep, plate current meter gone. Anyone
other
>than Harbach have one? Sounds like the ones from Harbach require some panel
>work and if I'm correct they are not an exact cosmetic match.
>
>I will perform some of the mods that were suggested and I'll let the group
>know what results I've achieved.
>
>Thanks again.
>
>Walter - VE3EN
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|