Amps
[Top] [All Lists]

[AMPS] Re:HV on tube w/o filament voltage

To: <amps@contesting.com>
Subject: [AMPS] Re:HV on tube w/o filament voltage
From: jono@enteract.com (Jon Ogden)
Date: Mon, 29 Mar 99 12:08:05 -0600
>If your power supply was "very warm" with zero current, how warm it was
>after heavy use during contest ?

Actually, not bad.  When powered correctly, the supply has a fan running 
it its cabinet.  And when I say very warm, I don't mean hot.  Just that 
its warmer than I'd noticed it!  After running heavily all weekend, the 
supply cabinet really didn't change much in temperature.  I'd expect to 
get some heat since there are bleeder resistors across the caps that will 
dissipate plenty of heat.

73,

Jon
KE9NA


--------------------------------------------------------------------------
Jon Ogden

jono@enteract.com
www.qsl.net/ke9na

"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>