Amps
[Top] [All Lists]

[AMPS] Re:HV on tube w/o filament voltage

To: <amps@contesting.com>
Subject: [AMPS] Re:HV on tube w/o filament voltage
From: measures@vc.net (Rich Measures)
Date: Tue, 30 Mar 1999 11:13:47 -0800
Mr. Ehrhorn -
Anyone can download a free e-mailer app. that handles attribution.  
If you run Windows OS, the URL is:
http://www.vcnet.com/help/win.html
If you run Mac OS, the URL is:
http://www.vcnet.com/help/mac.html


>
>Don't you  think the HV filter will generally discharge much faster than 
>the cathode will  cool down & lose emissivity, Peter...?  Even if the HV 
>contactor/relay takes 50 ms to open and the tube(s) look like ~1k dc load 
>without bias, I think the HV is pretty well gone in another 50-100 ms. 

?  agreed.  However, in Class AB1 amplifiers using oxide-cathode tubes, 
to preclude the possibility of cathode-stripping, it might be a good idea 
to make sure that the bias supply bleeds down much slower than the anode 
supply.    This is why there is no bleeder R on the filter capacitor (C1) 
in the electronic switched Class AB1 bias supply shown in Figure 4 on my 
Web site.  

>Don't think much cathode cooling occurs in 100-150 ms. HOWEVER, if there's 
>any solid evidence to contrary it's something I'd sure like to know!
>
>73, Dick
>
>-----Original Message-----
>From:  Peter Chadwick [SMTP:Peter_Chadwick@mitel.com]
>Sent:  Tuesday, March 30, 1999 5:15 AM
>To:    'amps'
>Subject:       RE: [AMPS] Re:HV on tube w/o filament voltage
>
>
>The problem I could see is when switching off: if the bias goes down while
>the cathode ( rather than filament) is hot, it could lead to problems  with
>stripping. It might not do a thoriated filamenmt much good, because you
>start running out of emission, but generally, their thermal time constants
>are much less than cathodes.
>
>73
>
>Peter G3RZP



Rich...

R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures  


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>