My plate voltage drops from 5600 VDC to 4700 under load,(pair 4-1000A's
.7A) My line voltage drops from 240 to 233. My filter cap is a pair of 32uf
oil caps in series. My last amp used 16uf filter cap, but didn't have a
voltmeter.
Should I:
1) Run a 30A 240V line
2) Buy 2 more oil caps
3) Disconnect my volt meter
Thanks for any ideas,
Dick NY1E
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|