Go to Mouser. They have the CDE 381LX 105C series. Low ESR makes them
fine for linear PS use. With 8 caps as used by KW there is no reason to
not use 450V replacements as there is a wide safety margin.
Norm
On Sat, 08 May 1999 18:17:18 -0500 Jerry K9GD <jerry@k9gd.com> writes:
>
> Greetings:
> Can anyone give me a line on getting replacement capacitors for the
> Kenwood
> TL-922. I am attempting to get caps that are close to 4 inches long
> and
> about 1.32 inches in diameter. The originals are 200mfd at 500v. I
> spoke
> to Richard Measures and he suggested that 450v hi temp caps would be
> OK.
> My problem is the size. Could it be someone out there has 8 of
> those they
> are using for a paperweight...or could it be someone replaced theirs
> and
> has a source.
>
> Thank you in advance.
> jerry k9gd
> mailto:jerry@k9gd.com
>
> __________________________________________________________
> mailto:Jerry@k9gd.com
> homepage: www.k9gd.com
>
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|