Phil, KP5C wrote and asked:
> Do you have distortion into the dummy load?
Don't know.
> You could have RF getting into the a.c. cord or the 13.8 volt
> pair from it to the amp.
>
> Does the Astron hold good regulation at high current? (steady 13.8v)
Will have to connect up a volt meter, and test same.
> I am running a SS-750 here, but my supply is 200 amps.
Did you build up the supply, or is it a commercial one?
> Listen to yourself on the dummy load at high power and report back.
Also, Alec. VK6APK suggested:
"If your supply is sagging under the 60A load, then perhaps a lead acid
battery in parallel will help under ssb peak power conditions."
Will do some tests/measurments and get back, but sounds as if
I am way under the ampere source needs, hi.
73, Jim, KH7M
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|