Amps
[Top] [All Lists]

[AMPS] Re: Filament Xfmr.

To: <amps@contesting.com>
Subject: [AMPS] Re: Filament Xfmr.
From: royanjoy@ncn.net (Roy Koeppe)
Date: Sun, 3 Oct 1999 11:39:29 -0500
About:

"I am building an amp with four 3-500Z using low bands only (160 and
80m).
I do have two filament transformers, 5V/80A w/o a center tap on the
secondary coil. The other one contains four coils with 5V/25A ea. coil
also
w/o any center taps on the secondary side."  (Etc.)

How about connecting a small "audio" or "power supply" choke from each
side of the secondary to "eventual" ground? Calculate the inductance
value of them so that they will only allow a negligible (AC) current
flow to ground while maintaining a balanced condition for all voltages
involved in the circuits. I think reasonable sized, cheap chokes may be
possible but must have low DC resistances. Maybe from junk box.

73,    Roy         K6XK






--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>