[AMPS] Safety resistor

[G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)]

measures wrote:
>
>Only if one inadvertently forgets to connect the grid-current meter shunt 
>R between gnd and the positive side of the anode-current meter shunt.   
>
>
Exactly! Nothing to argue about, then.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm