>
>
>-----Original Message-----
>From: measures <measures@vcnet.com>
>To: Steve Thompson <amps@txrx.demon.co.uk>; AMPS
><amps@contesting.com>
To: <amps@contesting.com>
>Date: 23 October 1999 13:13
>Subject: Re: [AMPS] RF Chokes
>
>
>>
>>I'm looking for suggestions of winding info., or parts I
>can
>>buy for a choke to use across a 50 ohm line at 3kW,
>>1.5-30MHz. It needs to handle 1A dc at the same time.
>
>? Piece of cake.
>
>snip
>
>Thanks, Rich.
ur welcome
>Making 30 odd that way sounds a bit like hard
>work :-)
? I use a hand-drill mounted in a vise to rotate the coil form during
winding. It goes pretty fast once I get set up. . One turn of the crank
gives around 6-turns.
>Does your 60uH limit avoid any resonances - this has to work
>broadband, not just ham band.
? 60uh single layer solenoid wound typically has no resonances in the
HF.spectrum.
>
>Tnx, Steve
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampsfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|