Amps
[Top] [All Lists]

[AMPS] A look underneath the Ugly amp. chassis.

To: <amps@contesting.com>
Subject: [AMPS] A look underneath the Ugly amp. chassis.
From: amps@txrx.demon.co.uk (Steve Thompson)
Date: Fri, 5 Nov 1999 21:37:32 -0000
-----Original Message-----
From: Hans Goldschmidt <sm5ki@algonet.se>
To: G0MJW <mike@g0mjw.freeserve.co.uk>; Jon Ogden
<jono@enteract.com>; AMPS <amps@contesting.com>
To: <amps@contesting.com>
Date: 04 November 1999 13:21
Subject: SV: [AMPS] A look underneath the Ugly amp. chassis.



I remember seeing in QST a primary voltage regulator ( with
tyristors )
sensing the secondary high voltage by means of a voltage
divider. Much
better than a reostat or a Variac. In a filament
stabilizer/adjuster you use
instead the rectified secondary voltage as reference.
------------------------
There was a similar design in VHF Communications, but I
can't find it. I'll post an issue number when I do.

Steve


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>