Amps
[Top] [All Lists]

[AMPS] Simulating center tap

To: <amps@contesting.com>
Subject: [AMPS] Simulating center tap
From: measures@vcnet.com (measures)
Date: Wed, 17 Nov 1999 05:35:52 -0700
>
>
>----- Original Message -----
>From: measures <measures@vcnet.com>
>To: <rakefet@rakefet.com>; Amps reflector <amps@contesting.com>
>Sent: Tuesday, November 16, 1999 11:50 AM
>Subject: Re: [AMPS] Simulating center tap
>
>
>>
>> >
>> >I just noticed that the filament transformer I was planning to use (got it
>> >free)
>> >for my 2 x 3-500z amp does not have a center tap.  It has two 5v 20a 
>windings
>> >which I was going to put in parallel.
>> >
>> Put the windings in series and you have a CT.
>> cheers, Vic
>>
>Rich can type faster than I, Vic...good advice!

?  Rich was probably sitting closer to his computer when the e-mail 
arrived. 

cheers, Phil

-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>