Amps
[Top] [All Lists]

SV: SV: SV: [AMPS] abnormallly high plate current

To: <amps@contesting.com>
Subject: SV: SV: SV: [AMPS] abnormallly high plate current
From: sm3jla@algonet.se (Mikael Westerlund)
Date: Fri, 7 Jan 2000 19:33:21 +0100

----- Ursprungligt meddelande ----- 
Från: measures <measures@vcnet.com>
Till: Lars Harlin <harlins@swipnet.se>; 'AMPS' <amps@contesting.com>
Skickat: den 7 januari 2000 08:41
Ämne: Re: SV: SV: [AMPS] abnormallly high plate current


> 
> >
> >
> >----- Ursprungligt meddelande ----- 
> >Från: measures <measures@vcnet.com>
> >Till: Lars Harlin <harlins@swipnet.se>; 'AMPS' <amps@contesting.com>
> >Skickat: den 6 januari 2000 18:28
> >Ämne: Re: SV: [AMPS] abnormallly high plate current
> >
> >
> >> >Maybe you should question the Ip reading anyway... Try to measure with an 
> >> >outboard multimeter.
> >> >Be careful!! HV is lethal!
> >> >
> >> Not as lethal as the electric-mains.  With HV one usually winds up across 
> >> the room with some missing hide.  .  .   With (lower-V) electric-mains,  
> >> one typically can not let go/gets "hung up".  .  The bottom-line is big 
> >> QRT time.  . 
> >> 
> >
> >And whats the point with this remark? 
> 
> The point is that HV is not necessarily the biggest danger to life.  

Yes!  Most people dies in the the bed.
Be carefull when you hit the sack.

73´s DE Mike

> cheers, Lars. 
> 
> -  Rich..., 805.386.3734, www.vcnet.com/measures.  
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 
> 


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>