R: R: [AMPS] broadband L at output

[i4jmy@iol.it (Maurizio Panicara)]

200 not so much, but 2000 certainly yes.
The transformer in the output, as you probably imagined, is mostly useless
and only sets an higher voltage across the load capacitor therefore
increasing the need to use an expensiver (and probably larger in size) one.

73,
Mauri I4JMY




----- Original Message -----
From: Mark S Graalman <wb8jkr@juno.com>
To: <i4jmy@iol.it>
Cc: <philk5pc@tyler.net>; <vk3wu@hotmail.com>; <amps@contesting.com>
Sent: Friday, January 21, 2000 1:56 AM
Subject: Re: R: [AMPS] broadband L at output


>
> 200 to 50 ohms high?
>
> Mark WB8JKR



--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm