Amps
[Top] [All Lists]

[AMPS] re: SB-200 to 6m using 4CX250B

To: <amps@contesting.com>
Subject: [AMPS] re: SB-200 to 6m using 4CX250B
From: nospam4me@juno.com (nospam4me@juno.com)
Date: Thu, 20 Jan 2000 22:07:13 -0800
Hi Steve,

There is some data on VHF 4cx250 amps at  http://sonic.ucdavis.edu   It
should be of interest to you. 

I'd be curious to know if your Kachina is the cpu radio or the original
Palomar version like the one I have here?

After your conversion, I'd like to buy your (or anyone else's) spare
SB-200 parts. I've got one here that arrived in poor shape.

cheers
skipp
nospam4me@juno.com

:From: Steve Hajducek <n2ckh@cybercomm.net>
:Subject: SB-200 to 6m using 4CX250B
:Does anyone have any experience in building a 6 meter amplifier
:using two 4CX250B tubes recently, especially the conversion of
:a SB-200 to these tubes that would be willing to convey to me
:the insight of their experinces ?

My current 6 meter radios (Yaesu FT-680R and FT-736R) are both
10 watt units, thus the plan conversion. My older Kachina 1 6 meter
radio would drive the 572B tubes to full output, but that radio is just
to old to really use regularly.

/s/ Steve, N2CKH
http://www.QSL.net/n2ckh




--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>