>
>Maurizio says:
>
>>May be on a matched and purely resistive load.
>>Iron core baluns, unless very largely oversized, do not perform well in
>case
>>of mismatches
>
>
>If it's a transmission line transformer, it has to be a very high mismatch
>to screw things up badly. Of course, it isn't a balun, so the balance
>requirements don't exist, possibly easing matters. If it's not a
>transmission line transformer, then all bets are off.
>
With 200-ohms unbalanced in and 50-ohms unbalanced out, it has to be a
transmission line transformer.
later, Peter
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|