Amps
[Top] [All Lists]

[AMPS] need help

To: <amps@contesting.com>
Subject: [AMPS] need help
From: conrad.farlow@virgin.net (Conrad Farlow)
Date: Tue, 22 Feb 2000 17:12:55 -0000

----- Original Message -----
From: Remigijus <r.vaicius@omnitel.net>
To: <amps@contesting.com>
Sent: 22 February 2000 15:12
Subject: [AMPS] need help


>
> Hello Power World,
>
> I'm trying to recalculate some dimentions to metric
> standart, but I have got one problem.
> "RFC (Anode choke) 50t (urns) of 22swg on 3/4" (18.3mm) PTFE Rod....."
> Could somebody expalin me what does it mean SWG (wire number ???) and
> how it to convert into metric system. And what material is PTFE ?
> Also 16swg, 28swg and so and so.
>
> Any help will be greatly appreciated.
>
> Thanks in advance.
>
> Remi LY2MW
>

Remi here's a little table that gives the equivalent swg (standard wire
guage) awg (american wire guage) to metric measurements.Others may find use
for it so I have posted it to the group.PTFE is teflon.If you need a piece
of teflon rod to make the anode choke for your new 6m PA (gs35b GJ4ICD
design perhaps?)I have a piece that I will gladly send to you.

SWG        AWG        DIAM. MM
12             10                2.642
14             12                2.032
16             14                1.626
18             16                1.219
20             19                0.914
22             21                0.711
24             23                0.559
26             25                0.457
28             27                0.376
30             28                0.315
32             29                0.274
34             31                0.234
36             32                0.193
38             34                0.152
40             36                0.122


73 de Conrad G0RUZ







--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>