Hi All,
Thanks for the help with the unruly SB-200 amp. It is now putting out 800
watts PEP and all bands except 10m where it does about 700 watts PEP.
It was the plate choke. Some of the turns got shorted together during the
HV/GND short and was not providing enough inductance for 40 and 80m.
Regards as always,
Jeff Weinberg W8CQ
w8cqjeff@ameritech.net
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|