>
>Phil,
>This was about 4 years ago ... I don't remember what the voltage was or if I
>measured it.
Other owners of 2K-4s have reported c. 5v on the filament.with 240v in.
>This was an amp I had for a ~short~ time.
SOP
.
cheers , Terry
>----- Original Message -----
>From: Phil Clements <philk5pc@tyler.net>
>To: Terry Gaiser - W6RU <w6ru@lightspeed.net>; <W8JI@contesting.com>;
><amps@contesting.com>
>Sent: Monday, March 06, 2000 11:44 AM
>Subject: Re: [AMPS] Re: Poor Science
>
>
>> > So far it is the only thing that makes any possible sense ... you have
>not
>> > offered one possible explanation ... except for the filament was ready
>to
>> > break ... twice? LOL
>> >
>> > Terry W6RU
>>
>> It would be interesting to know what your filament voltage is on that amp.
>> (at the tube pins) I am not even hinting that it had anything to do with
>the
>> problem. Some amps have the filaments wired in series, and a trifilar
>> wound filament choke. I am not familiar with your Henry model #.
>>
>> (((73)))
>> Phil, K5PC
>>
>>
>>
>>
>>
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampsfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|