At 08:28 AM 3/10/00 -0500, Tom Rauch wrote:
>Obviously the SB-220 has incorrect matching or some other
>problem on the input, otherwise the impedance at the TS-950
>wouldn't change.
>
>As long as a 50 ohm line is terminated in a 50 ohm load, length will
>not affect the impedance at the transmitter.
Sure, and in this case the original indicated input SWR was more like 1.5:1
than 1:1, hence the length of feedline mattered. I'd still like to know
why a higher indicated SWR (on the TS-930) translated to higher output,
plate current and grid current on that one band, but for now it's enough
just to have things back behaving normally...
73, Pete Smith N4ZR
n4zr@contesting.com
Don't forget to update your entry on the World Contest Station Database, at
http://206.102.70.3/search.htm
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|