on 3/14/00 7:23 PM, Bill Coleman at n2bc@stny.rr.com wrote:
> It's time to retire the WW2 oil caps in my HB amp.
> Want to build a 'holder' for 16 electrolytics. The questions are: what
> kind of plasic? Where can I get 10" x 10" x .25" pieces?
The cap bank in my HV power supply has an interesting way of doing this. I
can't claim credit since the guy who originally built the amp (I REBUILT the
RF deck) did the HV stuff and I did very little but clean it up.
What he did was to use a plexiglass sheet on top of the caps. Holes were
drilled into the plexiglass that lined up with the screw terminals on the
caps. The plexiglass sits on top of the caps and the caps are held in place
by the plexiglass and all connections to the cap terminals are made through
those holes. The plexiglass is also bolted to the bottom of the HV cabinet
with long bolts thereby putting downward pressure on the caps as well.
It's hard to explain, but you can see it on my webpage: www.qsl.net/ke9na
73,
Jon
KE9NA
-------------------------------------
Jon Ogden
KE9NA
Member: ARRL, AMSAT, DXCC, NRA
http://www.qsl.net/ke9na
"A life lived in fear is a life half lived."
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|