Amps
[Top] [All Lists]

[AMPS] 3-500Z grid to filament resistance?

To: <amps@contesting.com>
Subject: [AMPS] 3-500Z grid to filament resistance?
From: 2@vc.net (measures)
Date: Thu, 27 Apr 2000 18:32:07 -0700
>
>Greetings,
>
>I suspect that one or both of the 3-500z's in my SB-220 (original Eimac
>bottles, date code 1977!) may have a grid to filament short.  I've
>measured about 11 Kohms with my DVOM while the tubes are still in the
>socket.  I've heard that I should be seeing around 100 Kohms.
>
>Can someone confirm what the grid to filament resistance of a good
>3-500z should be?

The resistance depends on the grid-fil. potential.  At approx 8000v, 
roughly 2uA will flow in a new tube.  
>
cheers, Charlie

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>