Amps
[Top] [All Lists]

[AMPS] G3SEK Triode Board

To: <amps@contesting.com>
Subject: [AMPS] G3SEK Triode Board
From: Ian White, G3SEK" <g3sek@ifwtech.com (Ian White, G3SEK)
Date: Sun, 25 Jun 2000 22:33:59 +0100
Jim wrote:
>    Just received my Triode board from G3SEK. Looks great. Just one problem, I 
> cannot 
>    seem to find the MOSFETS that the board calls?for. Anyone had any luck 
> with this ? 
>    Anyone have the US part numbers for the?MOSFETS.
>    ?
I have e-mailed Jim directly with Digi-Key part numbers and substitution
suggestions, but would also appreciate feedback from anyone else on US
sources for:

RFP08P05 - Harris-Intersil, P-channel MOSFET, Vds >=50V, Rds(on)<=0.3
ohms, standard G-D-S TO-220 pinout. IRF9530 looks like a good
substitute. 

ZVN3306A - Zetex (from Digi-Key). Small N-channel MOSFET, 30V, TO-92 or
similar, S-G-D pinout.

ZTX302 - Zetex (not in my old Digi-Key catalog). Small medium-gain NPN
bipolar, 30V, TO-92 or similar, S-G-D pinout. Lots of substitutes, I'm
sure!



73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.com/g3sek

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>